Apart from innovating components and their corresponding networks, one major change that IT companies have employed is becoming increasingly user-friendly. They’ve begun to accept the reality that not all consumers are particularly tech-savvy. One aspect that has experienced arguably the largest shift is setting up a router.

Netgear, which is known throughout the world as a leading computer systems corporation, has taken the lead and found great success in this facet. If you are one of the many users who have recently acquired one of their devices, here’s a quick step-by-step blueprint on how to setup a Netgear wireless router.

Step 1 – Check All Needed Parts

Before even beginning this setup process, you’ll need to make sure all the crucial components are complete first. Read through the manual and do a quick checklist. It would also help if you have a small toolbox and electric tape at your disposal, just in case you may need it. Once everything is in order, you can then proceed to the next step.

Step 2 – Connect Ethernet​​​​ Cable

An Ethernet cable is a type of connector used when attaching one grid device to another, such as a computer and router. It is usually bright-colored, to be easily detected, and has a specialized fastener on each end.

Given its primary purpose, you’ll need to use it to link your internet provider’s modem with the internal port of your Netgear router. This will allow the signal to pass through both these apparatuses and is the first major step to establishing the network.

Step 3 – Activate The Modem

After the previous step, you’ll need to make sure that the frequency exchange is working without a hitch and that your DSL modem is functioning. Plug it into the power source and turn this contraption on. Carefully inspect it to ensure that all the lights are lit up to a solid color. There should also be a meter, which indicates that the connection is working well.

However, if you notice anything out of the ordinary like the internet is disconnected or you hear a loud sound, I advise you to contact your provider as soon as possible. They should send a representative to check it out immediately.

Step 4 – Turn Your Netgear Router On

In the same way that you activated your mode, you’ll also need to power up your Netgear router. Connect it to an available sock and press the power button. Additionally, don’t forget to straighten the antennae. Wait for a few moments until the LED lights stabilize. Once you see this, you should be good to go.

Step 5 – Search For The Preset Wireless Settings

One of the most important pieces of information you’ll need is the preset wireless setting. Basically, this tells you what the default SSID and password of your wireless router is. You’ll need to know this to access the system and consequently change it to your preference.

Once you locate this code, keep it in a safe place or snap a photo of it. You’re going to need this in one of the later actions.

Step 6 – Connect To The Network

Now would be the time to connect your gadget to the internet. Go to your phone or tablet’s settings and actuate the Wi-Fi connectivity. Search for the router’s SSID and type in the password, which is reflected in the present wireless settings, and wait to be granted access into the network. Once it says that you’re in, try opening a browser or an application to check if you’re really online.

After completing this part, I would suggest that you surf the net for about ten minutes, just to make sure the router is running smoothly. You should do an Internet speed test to check if your bandwidth is at par with what you and your provider agreed. Take advantage of this time to inspect all the minute details.

Step 7 – Change the SSID And Password

The final key step of setting up your Netgear wireless router is to change the preset settings into a personal one. You can do this by opening a browser on your device, which could either be Safari, Google Chrome, or Internet Explorer, and typing http://www.routerlogin.com or http://www.routerlogin.net on the address bar. Navigate through the website until you reach the portion that requires you to log in with your default network name and passcode.

Proceed to configure your router, using the Netgear Genie, and edit your details. My personal suggestion would be to choose a name that’s unique, so you or your loved ones can easily identify it.

As for your password, try to make it as complicated as possible. Use a combination of uppercase and lowercase letters, numbers, and even symbols. Never use generic codes like ABCD, 1234, your name, or your birthday. These are probably the first things a hacker will try when attempting to get into your server. Additionally, think of a cipher that’s personal and easy to remember, like your first dog’s name or favorite teacher in elementary school. It may seem like a simple task, but doing it properly will go a long way in securing your wireless router system.

Step 8 – Do One Final Check

After going through all these instructions, just do a final check. Start by checking the modem and router to certify that each cable is properly fastened. Examine also if there are any damages or loose ends.

Next, try disconnecting and reconnecting your gadget to the Wifi, just to make sure that both the SSID and access code have been altered. Type it down carefully to verify the exact characters that you chose.

Finally, scrutinize the location of your hardware. Make sure that it’s near a stable power source and Internet port, is a safe distance from any hazards, and far away from windows. Place it in an area that’s secure, but also where people can easily connect to it.

Once you’ve done this, you can now enjoy your hard-earned web access!